Skip to main content
Three Raytools cutting heads side by side with their ceramic-ring families, upper and lower protective window sizes, and nozzle threads

BM06K vs BM110 vs BT240S: Which Raytools Consumables Interchange

The short answer: two ring families, one shared window

These three heads are compared because they arrive in the same enquiry, not because they are alike. BM110 and BT240S sit on the same Raytools ceramic ring — D32-H12-M14, part 120274100B. Rings and standard nozzles cross over between those two. BM06K does not sit in that family: the Raytools parts tables put it on a D21.4-M11 ring, shared with the BD04K and BD08K.

One consumable does cross the whole conversation: the upper protective window, Φ24.9×1.5, is the same size on the BM06K and the BM110. The lower windows are not: Φ37×7 on the BM06K, Φ27.9×4.1 on the BM110. That single row is where most mixed orders go wrong.

HeadCeramic ringUpper windowLower windowNozzle
BM06K
6 kW class, F100 collimation
D21.4-H16.9-M11 (120515092B) — one kit listing says D28-M11, see belowΦ24.9×1.5Φ37×7D32 series H15 quoted by resellers — confirm against the ring you hold
BM110
≈3 kW, 28 mm aperture
D32-H12-M14 (120274100B)Φ24.9×1.5Φ27.9×4.1D32 M14
BT240S
2D, auto focus
D32-H12-M14 (120274100B)not published — measure the old onenot published — measure the old oneD32 H15 M14, or the bullet nozzle 10.5×22 under a locking nut

Everything below is the reasoning behind that table, and the places where two independent sources disagree. Where they disagree, we say so and ask you to measure, rather than pick the tidier version.

The ring decides the order, not the outline of the head

A ceramic ring is three things at once: the insulator that lets the capacitive height sensor read the sheet instead of the body, the seat the nozzle threads into, and the depth stop that sets nozzle standoff. Its diameter and thread are what make a part fit. Nothing else on the head is as decisive, and nothing is less visible in a product photo.

That is why “the nozzle looks the same” fails as a test. A D28 M11 nozzle and a D32 M14 nozzle can share a 1.5 mm bore and still not be interchangeable, because the thread that holds them belongs to a different ring.

BM110 and BT240S: same ring, different lower window

Both appear on the D32-H12-M14 ring, part number 120274100B, in ceramic tables published by independent parts suppliers. Same part number means the practical things follow: a ring bought for a BM110 seats on a BT240S, and a standard D32 M14 nozzle threads onto either. The nozzle length is where they part — BT240S is quoted with a D32 H15 body, and also takes the slim bullet nozzle clamped by a locking nut.

The windows do not follow. The BM110 carries Φ24.9×1.5 on the collimating side and Φ27.9×4.1 on the focus side; for the BT240S we have not found a published size, so we do not print one. If a supplier sells you a “BT240S window kit” that contains the BM110 numbers, that is an assumption, not a specification. Measure the part that came out.

Full part lists for each head are on their own pages: the BM06K fit guide, BM110 consumables and BT240S consumables.

BM06K: a 6 kW head that is not in the family

The BM06K is the odd one, and it is odd in a way that costs money. It is a 6 kW-class auto-focus head with F100 collimation and F150 or F200 focus options, QBH input, and up to 30 bar assist gas. Its window stack is the high-power pattern: Φ24.9×1.5 on the collimating side, Φ37×7 on the focus side.

But its ceramic ring is D21.4-H16.9-M11 (120515092B), the size it shares with the BD04K and BD08K — not the D32-M14 of the BM110/BT240S, and not the D28-M11 that the rest of the BM11x range uses. Order a D32 M14 nozzle for a BM06K on the assumption that “6 kW heads are all D32” and you get a nozzle that will not thread.

One more split inside the model: a 3D 90° variant of the BM06K exists, and its hardware is not the 2D head's. Read the plate before the parts list. If the machine is a 3D system, stop here and send the nameplate photo — the 2D numbers below do not transfer.

BM06K is not BS06K

One letter, two heads, two ring families. The BS06K appears on the D28-H12-M11 ring (120515099A) alongside the BT220, BM114 and BM115. The BM06K is on D21.4-M11. Parts for one do not fit the other, and searching either name returns listings for both, because the resellers mix them freely.

The same table also files the BS12K, BS15K and BS20K on a D41-M11 ring, which is a third family again. If your head is a “BS” rather than a “BM”, the BM06K column above is the wrong column.

Where the published lists disagree

Three places, and we would rather name them than smooth them over:

QuestionWhat the lists sayWhat we do
Which ring does a BM06K take?Three independent ceramic tables: D21.4-H16.9-M11 (120515092B). One consumables package listing for a “BM06K-2D”: ceramic body D28 M11.Treat as unresolved. Ask for the ring photo, or measure across the ring and the thread pitch.
What lower window does a BT240S take?No published size in the tables we read. BM110's Φ27.9×4.1 is often quoted in its place.Quote against the old part. Two numbers: outside diameter, thickness.
What nozzle does a BM06K take?Resellers sell “D32 series H15 M14” nozzles labelled for BM06K, which does not sit naturally on a D21.4 ring.Read the label as a cross-sell, not a specification. The ring decides.

None of these is a scandal. Parts catalogues are compiled from different revisions of the same head, and Raytools' own naming has not been uniform across generations. The honest position is that a head is identified by its plate and its parts, not by the family it is filed under.

Three checks before the order leaves

  • Photograph the nameplate. BM06K or BM06K 3D 90°; BT240S or BT240 or BT220; BM110 or BM110S. The suffix changes the ring more often than the prefix does.
  • Measure the old window on both numbers. Outside diameter and thickness, with a micrometer, not a ruler. A window 0.1 mm thin sits loose, cools worse, and reads as a gas fault rather than a size fault.
  • Photograph the ring, not the head. Diameter across the ring and the thread inside it. D32-H12-M14, D28-H12-M11 and D21.4-H16.9-M11 are three different answers to the same question, and all three are in production.

Send those three and the order is unambiguous. Without them, the safest order is a sample of one — a single window and a single nozzle on the machine, then the box.

FAQ

Will a BM110 nozzle fit a BT240S?

The thread does: both heads are on the D32-H12-M14 ring, 120274100B. The length does not always: BT240S is quoted with a D32 H15 body, and can also run the bullet nozzle under a locking nut. Check the standoff you need before buying ten.

Can I use a BM06K window on a BM110?

The upper one, yes on size: both are Φ24.9×1.5. The lower one, no: Φ37×7 against Φ27.9×4.1. Whether the upper actually seats depends on the retaining cap, so keep the two positions labelled when you take the old ones out.

Is the BM06K the same as the BS06K?

No. BM06K is on the D21.4-M11 ring; BS06K is on D28-M11 (120515099A). Different ring, different nozzle, different parts list.

What lower protective window does a BT240S take?

We do not publish a size, because the parts tables we could verify do not. Measure the old window — diameter and thickness — and we will match that, not a catalogue guess.

Sources

Raytools BM06K head specification (F100 collimation, F150/F200 focus, Φ24.9×1.5 and Φ37×7 windows, ≤30 bar) from a reseller specification sheet and a second independent listing, both read 2026-11-15. Raytools ceramic-ring tables (D21.4-H16.9-M11 → BM06K/BD04K/BD08K; D32-H12-M14 → BT240/BMH109/BMH110/BMH111/BMH114; D28-H12-M11 → BT220/BM114/BM115/BS06K) from three independent parts suppliers, read 2026-11-15. BM110 specification (≈3 kW, 28 mm aperture, Φ24.9×1.5 and Φ27.9×4.1) and BT240S nozzle configuration (D32 H15 M14, bullet nozzle 10.5×22) from two independent listings, read 2026-11-09. Dimensions are quoted as published; where sources disagree we say so in the text.

About

Yangzhou Ruiying International Trade Co., Ltd. specializes in laser cutting consumables, optics and machine parts — serving distributors, service centers and OEMs worldwide from Yangzhou, Jiangsu, China.