Skip to main content

Raytools BM06K Consumables: The 6 kW Head on the D21.4 Ring

BM06K sits on the D21.4-M11 ring — one family away from the BM110 heads

The BM06K is Raytools' 6 kW class 2D head (F100 collimation, F150 / F200 focus modules). On the ceramic ring it belongs to the D21.4-H16.9-M11 family — the same ring pattern as the BD04K / BD08K heads, not the D32-M14 family that the BM110 and BT240S sit on.

That decides the order before anything else: a D32-M14 ring from a BM110 will not seat on a BM06K, and a BM06K ring will not take a BM110 nozzle. The heads look like relatives; the consumables are not interchangeable.

What fits a BM06K

PartWhat fitsWhat decides it
Ceramic ringD21.4-H16.9-M11 — same family as BD04K / BD08KRing diameter and M11 thread; see the note below on a conflicting D28 listing
Upper protective windowΦ24.9 × 1.5 mm (collimating side)Same size as the BM110 collimating window — the one part that crosses between the families
Lower protective windowΦ37 × 7 mm (focus side)Thick high-power window; not shared with the BM110 family
NozzleQuoted as D32 H15 M14 by parts resellers — check it against the ring you holdThread and seat height; see the note below
Focus lensFocal length to match the focus module (F150 / F200)Marking on the module

The window sizes above come from the BM06K operating documentation. The ring diameter and the nozzle pattern are where the reseller lists disagree with each other — that is not a reason to pick one, it is a reason to measure.

Where the parts lists disagree

  • The ring. One well-stocked reseller lists the BM06K on D21.4-H16.9-M11 with the BD04K / BD08K family; another lists a D28-M11 ring for it. We do not resolve this by choosing a side — a photo of the old ring next to a rule settles it faster than either catalogue.
  • The nozzle. A D32 H15 M14 nozzle is quoted for the BM06K in the same lists that describe a D21.4 ring. A D32 body does not thread onto an M11 ring seat in the usual pattern, so one of the two rows is describing a different head or a different revision. Confirm the ring first; the nozzle follows.
  • The 3D variant. A 90-degree 3D version of this head exists and its consumables differ. Read the nameplate before matching anything.

BM06K is not BS06K

One letter, different family. The BS06K sits on a D28-H12-M11 ring, alongside the BT220 / BM114 / BM114S heads. Ring diameter, height and the nozzle seat all differ from the BM06K. If your order form says BS and the head says BM (or the other way round), stop and photograph the nameplate — the two heads wear the same brand and the wrong one ships easily.

Where BM06K orders go wrong

  • Ordering by “6 kW Raytools head”. The power class does not pick the ring; the model letter and the physical ring do. A BM06K and a same-power head from another series can take completely different parts.
  • Assuming BM110 windows fit. The lower window is a different diameter and thickness. Only the Φ24.9 × 1.5 upper window is documented to match, and even that should be confirmed against the cartridge in the drawer.
  • Copying a BS06K order because the number is close. See above — different ring, different seat.
  • Replacing the ring for a height fault that is the cable. Same symptom as on every head: if there was no crash, check the sensing cable before parts.

How to confirm

  1. Nameplate photo — BM06K, and note whether the head is a 2D or the 3D 90° variant.
  2. Old ceramic ring next to a rule, thread visible — this settles the D21.4 vs D28 conflict in one picture.
  3. Both windows out of the drawer, measured (outer diameter × thickness).
  4. We confirm ring, nozzle pattern and window sizes in one reply, then quote.

FAQ

Do BM110 or BT240S parts fit the BM06K?

Not as a set. BM110 and BT240S sit on the D32-M14 ring; the BM06K is on the D21.4-M11 family, so the ring and standard nozzles do not cross. The Φ24.9 × 1.5 upper window is the documented overlap. A head-by-head comparison is in BM06K vs BM110 vs BT240S, and window sizes in general in our protective lens size chart.

Is the BM06K the same as the BS06K?

No. The BS06K is a different head on a D28-M11 ring with the BT220 / BM114 family. Same brand, one letter apart, different consumables.

Which nozzle do I order for a BM06K?

The reseller lists quote a D32 H15 M14 pattern, but that conflicts with the ring rows in the same lists. Send a photo of the nozzle in place and the ring; we match on what is physically on the head rather than on the catalogue row.

Sources

Raytools BM06K operating documentation (window sizes, optical configuration) plus ceramic-ring and nozzle listings from independent parts suppliers, read 2026-11-15. Where the listings conflict (BM06K ring diameter, nozzle pattern), the page says so instead of choosing a side. Part numbers deliberately not reproduced.

Related categories

Ruiying is an independent supplier of aftermarket laser consumables. Brand names are used only to indicate compatibility and remain the property of their respective owners. We are not affiliated with, authorised by, or endorsed by these manufacturers. Specifications vary between head revisions — please confirm the full model before ordering.

About

Yangzhou Ruiying International Trade Co., Ltd. specializes in laser cutting consumables, optics and machine parts — serving distributors, service centers and OEMs worldwide from Yangzhou, Jiangsu, China.