Raytools BM109 Consumables: 1.5 kW, D32 M14, 24.9/27.9 Windows
The smallest head in the BM family — with the same nozzle ring
The Raytools BM109 is a 1.5 kW autofocus head, released in 2017 and still everywhere on small and mid-size fiber machines. The assumption people make about it is that a 1.5 kW head must use smaller consumables than a 3 kW one. Half true, and the half that is wrong is the expensive half.
The BM109 sits on the D32-M14 ceramic ring and takes the same two window sizes as the BM110 and BM111 — 24.9 × 1.5 upper, 27.9 × 4.1 lower. What is smaller is the lens set: D28 optics, focal lengths 125 and 150 mm, and a 26 mm clear aperture. So the nozzle side is family-wide and the optic side is model-specific. Order accordingly.
What the BM109 itself is
| Parameter | BM109 |
|---|---|
| Power rating | ≤1.5 kW |
| Fibre interface | QBH / QD |
| Clear aperture | 26 mm |
| Lens set | D28 composite |
| Collimating focal length | F75 / F100 |
| Focusing focal length | F125 / F150 |
| Auto-focus range | +8 to −9 mm (17 mm travel), 0.05 mm accuracy |
| Assist gas | ≤25 bar |
| Weight | ≈3 kg |
BM109 vs BM110 vs BM111
These three share a nozzle ring and a window set, and differ in optics and power. That combination is why parts get ordered across them by mistake.
| BM109 | BM110 | BM111 | |
|---|---|---|---|
| Power rating | ≤1.5 kW | ≈3 kW | 3.3 kW |
| Clear aperture | 26 mm | 28 mm | 28 mm |
| Collimating | F75 / F100 | F75 / F100 | F75 / F100 |
| Focusing | F125 / F150 | F125 / F155 / F200 | F125 / F155 / F200 |
| Ceramic ring | D32-M14 (D32-H12-M14) — same on all three | ||
| Protective windows | 24.9 × 1.5 upper / 27.9 × 4.1 lower — same on all three | ||
| Nozzle | D32, 15 mm tall, M14 thread, 0.8–5.0 mm bore, single or double layer | ||
Read the bottom three rows as one fact: the consumable-level parts cross freely between BM109, BM110 and BM111. The rows that do not cross are the lens set and the aperture. So a shop running a mixed fleet can standardise nozzles, rings and windows across all three — and must not standardise the focus lens.
Parts that follow a BM109
| Part | What fits | What decides it |
|---|---|---|
| Ceramic ring | D32-M14 (D32-H12-M14) | Ring diameter and M14 thread; the 3D / tube variant of this head takes D19.5-M8 instead |
| Nozzle | D32 body, 15 mm tall, M14; 0.8–5.0 mm bore | Bore to the thickness, layer to the gas |
| Protective window — upper | 24.9 × 1.5 mm | Collimator side; the thinnest section in the range |
| Protective window — lower | 27.9 × 4.1 mm | Focus side; takes the spatter and fails first |
| Focus lens | D28, FL125 or FL150 | Edge marking. F155 and F200 belong to the BM110 / BM111 optics, not to this head |
| Collimating lens | D28, F75 or F100 | Paired with the focus lens |
Where BM109 orders go wrong
- Ordering D28 nozzles. The lens set is D28, the nozzle ring is D32-M14. It is the same head, two different numbers — and this is the single most common mix-up on the model.
- Buying a FL155 or FL200 focus lens. Those focal lengths are not in the BM109's optics. The head takes FL125 or FL150; a longer lens will fit the drawer and put the focus where the parameter table does not expect it.
- Assuming the 24.9 / 27.9 windows are “small-head” parts. They are the family standard, shared with the 3 kW and 3.3 kW heads — which is good news for stocking.
- Confusing it with the 3D / tube version. That variant uses a D19.5-M8 ceramic body and a much smaller nozzle seat. The nameplate does not always say which one you have.
How to confirm before ordering
- Nameplate photo — BM109 versus BM109TC versus BM110. The power rating on the plate settles most of it.
- The old ceramic ring, measured across its outer diameter: 32 mm means the 2D head, 19.5 mm means the 3D one.
- The old focus lens, read at the edge — FL125 or FL150. If the marking is gone, the module or the machine's parameter set is the next best source.
- Send the three and we confirm ring, nozzle, window sizes and the lens in one reply.
FAQ
Does the BM109 use D28 or D32 nozzles?
D32, with an M14 thread. The D28 refers to the lens set, not the nozzle. If a supplier quotes D28 nozzles for a BM109, they have read the optics line and applied it to the wrong part of the head.
Can I use BM110 or BM111 consumables on a BM109?
Nozzles, ceramic rings and both protective windows — yes, those are the same parts. The focus and collimating lenses — no. The BM110 and BM111 run a 28 mm aperture with focal lengths up to 200 mm; the BM109 is a 26 mm aperture with FL125/150.
What focal lengths does the BM109 take?
Focusing: 125 and 150 mm. Collimating: 75 and 100 mm. Longer focal lengths belong to the higher-power heads in the family.
Related categories
Ruiying is an independent supplier of aftermarket laser consumables. Brand names are used only to indicate compatibility and remain the property of their respective owners. We are not affiliated with, authorised by, or endorsed by these manufacturers. Specifications vary between head revisions — please confirm the full model before ordering.