BOCI BLT421S Consumables: D34 Lower Window, D25.4 Upper
BLT421S: the revision between BLT421 and BLT422
The BLT421S is BOCI's upgrade of the BLT421: same 4-series family, same M11×0.75 nozzle thread, rated to 8 kW, with a wavelength range of 1030–1090 nm and focal lengths of 150 and 200 mm. BOCI's current entry model is the BLT422, so the 421S sits in the middle: still common on machines in the field, no longer the head a new machine ships with.
That position is exactly why this page exists. If you own a 421S, the question is not “which head is current” — it is which parts are specific to this revision, because most of them are shared with neither the 421 nor the 422.
What the 421S itself is
| Parameter | BLT421S |
|---|---|
| Laser power | ≤8 kW |
| Wavelength | 1030–1090 nm |
| Fibre interface | QBH / EOC |
| Magnification | M = 1.5 / 2.0 (100:150 / 100:200) |
| Focal length | 150 mm / 200 mm |
| Focus adjustment range | ±50 mm |
| Centring range | ±1.5 mm |
| Nozzle thread | M11×0.75 |
From the BLT421S product manual (V1.0, 2024-03). The BOCI product page quotes 1060–1090 nm; the manual says 1030–1090 nm, and the manual is what we follow.
Parts that are specific to a 421S
This is the table to check before ordering anything for this head. Each row is a part that does not carry over from the BLT421.
| Position | BLT421S | BLT421 (for contrast) |
|---|---|---|
| First upper protective window | D25.4 × 4 | D21.5 × 2 |
| First lower (standard lower) window | D34.0 × 5 | D34.0 × 5, different revision suffix |
| Upper-second window cassette | 421S-specific | 421-specific |
| First lower window cassette | 421S-specific | 421-specific |
| Second lower cassette | 421S-specific | 421-specific |
| Collimating lens group | 421S-specific | 421-specific |
| Capacitive sensor module | One part per focal length: F150 and F200 are different modules | Also split by focal length, different parts again |
| Second-lower spring-energised seal | d23–D31–T3.45 | Different seal |
What the 421S does share with the 421
- Ceramic body and locking ring — same parts, same seat.
- Nozzles — M11×0.75 thread, D28 body. (M8 belongs to the T / TS tube series, not to this head.)
- One spring-energised seal in the lower stack.
- Crash-protection screws — listed for both heads in BOCI's current table.
The practical consequence: nozzle and ceramic-ring orders cross between 421 and 421S without drama. Window, cassette, lens-group and sensor orders do not. That is where the money is lost, because those are the parts that look interchangeable on a photo. For the position-by-position comparison of the two revisions, see the BLT421 / BLT421S fit guide.
The D25.4 × 4 confusion, stated plainly
A great deal of online material says the 421S lower protective window is D25.4 × 4. That is a position mix-up, not a different opinion. On a 421S:
- D34.0 × 5 is the first lower (standard lower) window — the one that takes the spatter.
- D25.4 × 4 is the first upper window, and it also appears as upper-second and lower-second depending on the drawer configuration.
On the smaller 3-series BLT310 (3 kW), D25.4 × 4 does serve as the first lower window — which is very likely where the mix-up started. If a supplier tells you D25.4 × 4 is the lower window for a 421S, ask which drawer they mean, and measure your old part.
Maintaining a 421S now that BLT422 is current
Three realistic situations, and the honest answer to each:
- You are servicing one machine. Keep ordering 421S-specific parts by drawer position. The 421S is still supported; the wear parts exist. Confirm the drawer and the size from the old part, because the family name does not settle it.
- You are stocking for a small fleet. Stock the 421S windows and the ceramic ring, and keep the cassettes to the positions you have actually replaced. Cassettes do not fail on a schedule, they fail on a crash.
- You are deciding whether to keep or replace the head. The 421S is one generation behind the current entry model (BLT422). The parts that cross from 421S to 422 are the consumable-level ones; the modules are not designed to cross. If a 421S needs a lens group or a sensor module, price it against a head replacement rather than assuming a repair is always cheaper.
How to confirm before ordering
- Nameplate photo — BLT421S versus BLT421 versus BLT422. The suffix decides the parts stack.
- The old window, out of its drawer, measured with a caliper — diameter and thickness, plus which drawer it came out of.
- The focal length — 150 or 200 mm. The sensor module and the lens group are both ordered by focal length, so this is not a detail.
- Send the three and we confirm the position, the size and the revision before anything ships.
FAQ
Is the BLT421S discontinued?
It is superseded, not gone. BOCI's current entry model is the BLT422, and the 421S remains common on machines already in service. Consumables for it are still available; what changes is availability of the deeper modules, which is why it is worth confirming those before promising a repair date.
Can I use BLT421 protective windows in a BLT421S?
Only the first lower window is the same size (D34.0 × 5), and even there the revision suffix differs. The first upper window is not the same — D21.5 × 2 on the 421 versus D25.4 × 4 on the 421S. Do not order a 421 window set for a 421S.
Which focal lengths does the 421S come in?
150 and 200 mm, corresponding to magnification M = 1.5 and 2.0. The sensor module and the collimating/focus group are ordered per focal length, so quote it with the head model.
Related categories
Ruiying is an independent supplier of aftermarket laser consumables. Brand names are used only to indicate compatibility and remain the property of their respective owners. We are not affiliated with, authorised by, or endorsed by these manufacturers. Specifications vary between head revisions — please confirm the full model before ordering.