Bodor Laser Machine Consumables
Bodor builds the machine; the cutting head inside it comes from a head maker. Which one depends on the series, the power and the year, so the part you need is decided by the head, not by the machine badge. This page is about reading that correctly.
Bodor ranges, and the head behind them
Bodor's catalogue runs from the entry i and C series through P, A, L, H, G, B, EA, EC, SC, X, XC to Dream and Rocut. Across that range, published configurations list the cutting head as Precitec or Raytools — a choice made when the machine is specified, so two machines with the same series name can carry different heads.
| Where to look | What it tells you |
|---|---|
| Head nameplate (side of the head) | Precitec (ProCutter / LightCutter), Raytools (BM110, BM114, BT240S…) or WSX model |
| Nozzle on the head | D28 H15 body with M11 thread points to a Raytools-type head; a window cartridge format points to Precitec |
| Ceramic ring | M11 vs M8 thread, D28 vs D31 / D32 body |
| Machine serial plate | Machine model and build year — narrows the possibilities, does not decide |
We deliberately do not publish a machine-model → consumable table. For a machine builder it would be wrong for a large share of the machines in the field: the same series ships with more than one head depending on power, options and build year. The mapping that holds is head model → consumable.
What we supply once the head is known
| Head found on the machine | What we supply |
|---|---|
| Raytools BM / BT series | D28 H15 and D32 nozzles, ceramic rings (M11 / M8), protective windows, focus lenses |
| Precitec ProCutter / LightCutter | Nozzles, protective windows in cartridge or drawer format, ceramic rings, focus lenses |
| WSX NC / KC series | Nozzles, ceramic rings, protective windows, focus lenses |
| Anything else | Send the nameplate photo — we identify before quoting rather than ship the nearest thing |
Where Bodor machines usually go wrong
- Buying by machine brand. A listing described as a “Bodor nozzle” is usually a Raytools D28 / M11 part. If that machine actually carries a Precitec head, the nozzle does not fit — and nothing in the listing says so.
- Assuming one build year equals another. The same series shipped across several years can carry different heads. The nameplate is the only reliable source.
- Swapping window formats. Precitec heads take a cartridge; Raytools heads take a drawer. Same diameter does not mean interchangeable.
Ordering
- Photo of the head nameplate, and one of the machine badge if it is handy.
- Photo of the old nozzle or window next to a rule.
- We confirm the head brand and the part variant in one reply.
- Wholesale and OEM packaging available for distributors.
FAQ
Do you sell Bodor original parts?
No. We are an independent aftermarket supplier. For original Bodor parts, Bodor's own parts channel is the right place; what we supply is the consumable matched to the head that is fitted to your machine.
My machine badge says Bodor but the head says Raytools. Which do I order against?
The head. The machine badge tells you the gantry, the bed and the control; the head tells you the nozzle, the window and the ring. Order against the head, using the Raytools or Precitec chart.
Can you tell me which head my machine has from the model number?
Not reliably — that is exactly the information that varies by build. Send the nameplate photo and we will tell you what is fitted in the reply.
Related categories
Ruiying is an independent supplier of aftermarket laser consumables. Brand names are used only to indicate compatibility and remain the property of their respective owners. We are not affiliated with, authorised by, or endorsed by these manufacturers. Specifications vary between head revisions — please confirm the full model before ordering.