Skip to main content

Raytools BM111 Consumables: 3.3 kW, D32 M14, Two Windows

The BM111 is the 3.3 kW head in the BM family

The Raytools BM111 is a 2D autofocus head rated to 3.3 kW, with a QBH fibre interface and a 28 mm clear aperture. It is the head that most often appears on 1.5–3 kW machines that have been in service for years — which is why it arrives in our inbox as a consumables question rather than a head question.

Two things define its parts list: it sits on the D32-M14 ceramic ring (not the D28-M11 that the BM114 / BM115 use), and it carries two different protective windows in two different positions. Get those two facts right and the rest of the order follows.

Parts that follow a BM111

PartWhat fitsWhat decides it
Ceramic ringD32-M14 (D32-H12-M14)Ring diameter and M14 thread; the 3D variant of this head takes D19.5-M8 instead
NozzleD32 body, 15 mm tall, M14; single and double layer, 0.8–5.0 mm boreBore to the thickness, layer to the gas
Protective window — upper24.9 × 1.5 mmSits at the collimator; protects the collimating lens
Protective window — lower27.9 × 4.1 mmSits in the drawer near the focus lens; takes the spatter
Focus moduleFL125 / FL155 / FL200, D30 familyMarking on the module; focal length follows thickness
Collimating lensF75 / F100Paired with the focus lens — change them as a set, or not at all
Seal rings29.2 × 21 × 3.55 (upper), 32.2 × 24 × 3.55 (lower)Position, not the head model

Specifications as published by Raytools in its head catalogue, read 2026-11-21. Listed so you can match a part, not as a claim that we stock every variant.

The two windows do different jobs

This is the most common misunderstanding on a BM111, and it costs people money in both directions.

The 24.9 × 1.5 mm window sits near the collimator. It is thin, it is upstream, and it mostly sees what comes back through the nozzle — fume and fine dust rather than direct spatter. The 27.9 × 4.1 mm window sits lower, in front of the focus lens, and takes the brunt: spatter from pierces, ricochet from the kerf, the occasional tip-up. It wears out faster, and it is the one that should be checked first when cut quality drops.

The practical consequence: when the lower window has failed, the focus lens behind it has usually been absorbing energy for a while. Replacing the window and the lens together is not an upsell, it is the only way the new window lasts. And when the upper window is neglected, the symptom looks like a tired collimator rather than a dirty window — a wider kerf that no gas adjustment fixes.

Where BM111 orders go wrong

  • Ordering D28 nozzles. BM111 is D32-M14. D28-M11 belongs to the BM114 / BM115 / BT220 branch; it will not thread on.
  • Buying one window and assuming the other is fine. They fail at different rates for different reasons; the order should name both sizes.
  • Using 37 mm windows. That is the 6–12 kW family (BM114 / BM115 / BM116). A 37 mm window will not seat in a BM111 drawer, and forcing one is how seats get damaged.
  • Confusing it with the 3D version. The BM111 also exists in a 3D / tube configuration that takes a D19.5-M8 ceramic body and a much smaller nozzle seat. The nameplate does not always say which one you have.

How to confirm before ordering

  1. Nameplate photo — BM111 versus BM110 versus BM111TC.
  2. The old ceramic ring, measured across its outer diameter. 32 mm means the 2D head; 19.5 mm means the 3D one.
  3. The old lower window, out of the drawer, measured with a caliper — thickness included, because 4.1 mm and 4.0 mm are not the same part.
  4. Send all three and we confirm ring, nozzle, window sizes and the focus module in one reply.

Running a mixed fleet? The BM109 page shows which consumables cross between the 1.5 kW, 3 kW and 3.3 kW heads — the nozzle ring and both windows do, the lens set does not.

FAQ

Does the BM111 use D28 or D32 nozzles?

D32, with an M14 thread and 15 mm height. The D28-M11 nozzles belong to the BM114 / BM115 generation. If a supplier tells you both fit, they are quoting the family name rather than the part.

Is a BM111 the same as a BM110?

They share the D32-M14 ring and the same two window sizes, and they are often serviced with the same parts. They are not the same head: the optical modules and the power class differ, so the focus lens and the collimator should be ordered against the marking on the module, not against the family.

Can I use a 37 × 7 window in a BM111?

No. 37 mm is the high-power family (BM114 / BM115 / BM116). The BM111 takes 24.9 × 1.5 upper and 27.9 × 4.1 lower.

Related categories

Ruiying is an independent supplier of aftermarket laser consumables. Brand names are used only to indicate compatibility and remain the property of their respective owners. We are not affiliated with, authorised by, or endorsed by these manufacturers. Specifications vary between head revisions — please confirm the full model before ordering.

About

Yangzhou Ruiying International Trade Co., Ltd. specializes in laser cutting consumables, optics and machine parts — serving distributors, service centers and OEMs worldwide from Yangzhou, Jiangsu, China.